English
Русский
Español
العربية
CNC Punch Press Machine
cnc plate drilling and punching machine The YJX CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.
cnc plate drilling cutting machine
Driving mode: Hydraulic drive System.
Application: Punching hole.
The machine structures is welded with C-shaped steel plate, and the stress is removed by tempering heat treatment. The steel plate welded structure has good rigidity and strong anti-eccentric loading ability.
1. Machine Model and Configuration
2.1 Mechanical Part
| No. | Item | YBJ100 | YBJZ100 | YBJ120D | YBJ120 |
| 1 | Machine Layout Area | 5*3.5 M | 5*4.5 M | ||
| 2 | No. of Hosts | 1 set | |||
| 3 | No. of Workbench Bases | 1 set | |||
| 4 | No. of Y-Slide | 1 set | |||
| 5 | No. of X-direction Slide | 1 set | |||
| 6 | No. of Clamps | 2 sets | |||
| 7 | No. of drilling spindle heads | NO | 1 set | NO | |
| 8 | Pneumatic control system | 1 set | |||
| 9 | Hydraulic control system | 1 set | |||
| 10 | Buyer Preparation Working | Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier | |||
2.2 Electric control Part
| 1 | CNC Controller system | PLC control system |
| 2 | Drive System | Panasonic Servo Motor |
3. The main technical parameters of the machine
| No. | Item | YBJ100 | YBJZ100 | YBJ120D | YBJ120 |
| 1 | Processing plate size | 1500*800mm | 1500*1500mm | ||
| 2 | Processing plate thickness | 5-25mm | |||
| 3 | Punching force | 1000KN | 1200KN | ||
| 4 | Maximum punching (drilling) hole diameter | Φ26mm | Φ26mm Drilling OD Φ50 | Φ26mm | Φ30mm-25mm Φ40mm-20mm |
| 5 | Total number of modules | 3 Pcs | 4 Pcs | 3 Pcs | |
| 6 | Number of punching die | 2 Pcs | 3 Pcs | ||
| 7 | Number of print header groups | 1 Group | NO | ||
| 8 | Prefix | 10 Pcs | NO | ||
| 9 | Header size | (L*W*H)14*10*19mm | NO | ||
| 10 | Number of CNC axes | 2 | |||
| 11 | X, Y axis servo motor power | 2*2KW | |||
| 12 | X, Y axis feeding speed | 20m/min | |||
| 13 | Punching speed | 50-55 Times/Min | |||
| 14 | Total weight of equipment | 6T | 6.5T | 7.8T | 9.5T |
4. Machine working environment
| 1 | Power supply | 3 Phase 4-Wire System |
| 2 | Voltage | 3 Phase 380V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating Temperature | 0℃-40℃ |
| 5 | Relative Humidity | <90% no condensation |
| 6 | Compressed Air | Pressure: 0.8MPa Flow rate: 0.1m³/min |
4. Machine parts introduction
The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.
