English
Русский
Español
العربية
CNC Marking Punching And Drilling Machine For Plate Model YBJZ100
Brief Introduction:
The YBJZ100 CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.
CNC Marking Punching And Drilling Machine For Plate Model YBJZ100 Driving Model: Hydraulic Drive System.
Application: It is used to press the plate when punching to make the punched hole position accurate.
Components: Composed of a material pressing oil cylinder, material pressing claws, winch shaft, etc.
Machine parts introduction
The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.
2.1 Mechanical Part
| No. | Item | YBJZ100 |
| 1 | Machine Layout Area | 5*3.5 M |
| 2 | No. of Hosts | 1 Set |
| 3 | No. of Workbench Bases | 1 Set |
| 4 | No. of Y-Slide | 1 Set |
| 5 | No. of X-direction Slide | 1 Set |
| 6 | No. of Clamps | 2 Sets |
| 8 | Pneumatic control system | 1 Set |
| 9 | Hydraulic control system | 1 Set |
| 10 | Buyer Preparation Working | Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier |
2.2 Electric control Part
| 1 | CNC Controller system | PLC control system |
| 2 | Drive System | Panasonic Servo Motor |
3. The main technical parameters of the machine
| No. | Item | YBJZ100 |
| 1 | Processing plate size | 1500*800mm |
| 2 | Processing plate thickness | 5-25mm |
| 3 | Punching force | 1000KN |
| 4 | Maximum punching diameter | Φ26mm |
| 5 | Max. Drilling diameter | 50mm |
| 6 | Max. Thickness of drilling | 40mm |
| 7 | Feeding speed of drilling | 25-280mm/min |
| 8 | Stroke of drilling spindle | 180mm |
| 9 | Rotation speed of drilling spindle | 120-560rpm |
| 10 | Total number of modules | 4 Pcs |
| 11 | Number of punching die | 2 Pcs |
| 12 | Number of print header groups | 1 Group |
| 13 | Prefix | 10 Pcs |
| 14 | Header size | (L*W*H)14*10*19mm |
| 15 | Number of CNC axes | 2 |
| 16 | X, Y axis servo motor power | 2*2KW |
| 17 | X, Y axis feeding speed | 20m/min |
| 18 | Punching speed | 50-55 Times/Min |
| 19 | Total weight of equipment | 7T |
4. Machine working environment
| 1 | Power supply | 3 Phase 4-Wire System |
| 2 | Voltage | 3 Phase 415V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating Temperature | 0℃-40℃ |
| 5 | Relative Humidity | <90% no condensation |
| 6 | Compressed Air | Pressure: 0.8MPa Flow rate: 0.1m³/min |
