CNC High Speed Drilling Machine For Plate Model PMZ3020H

Introduction of each component of machine

PMZ3020H high speed metal plate CNC drilling machine is mainly composed of machine bed worktable, Gantry-moving frame, CNC vertical ram type drilling spindle head, automatic chip conveyor and circulating cooling device, hydraulic system, pneumatic system, electrical system, automatic lubrication system, etc.

The machine is a gantry moving CNC drilling machine, which is mainly used for high-efficiency drilling of flanges, discs, ring types, and tube sheet parts. It can drill through holes, drill blind holes, and step holes on simple materials and composite materials. And other functions, using hard alloy drill bit internal cooling high-speed drilling or high-speed steel twist drill external cooling drilling. The machining process of the machine tool is digitally controlled and the operation is very convenient. It can realize automation, high precision, multiple varieties and mass production.

1. Basic configuration

2.1 Mechanical parts

No.	Item	PMZ3020H
1	Size of machine(mm)	6000x3000x2900mm
2	Number of machine bed frame	1 set
3	Number of Gantry frame	1 set
4	Number of Spindle heads	1 set
5	Air-actuated control System	1 set
6	Hydraulic control System	1 set
7	Automatic Chip removal	1 set
8	Circulation Cooling system	1 set
9	Electrical System	1 set
10	The part responsible by purchaser	Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier

2.2 Electric control unit

1	system	YOKOGAWA
2	Driving system	Panasonic servo motor

3. Plat Drilling Machine Main Parameters

Item	Model		Unit	PMZ3020H
Max working size	Length x width		Mm	3000x2000mm(Maximum)
	Overlay thickness		Mm	100
Drilling spindle	Number of spindle		Pcs	1
	Morse taper of spindle			BT50 Taper hole
	Variable speed method			Inverter infinitely variable speed
	Speed of spindle		R/min	30-3000
	Stroke length of vertical ram drilling head		Mm	350
	Drilling diameter		Mm	Φ12-Φ50
	Spindle motor power		KW	15.0 KW
	Servo motor feeding power		KW	2.0 KW
Workpiece hydraulic clamping	Hydraulic pump pressure/flow		Mpa/L/Min	6.5MPa/22L/min
	Hydraulic pump motor power		KW	2.2 KW
	Hydraulic clamp clamping force		KN	7.5 KN
	Number of clamping cylinders		Pcs	12 Pcs
Electric control	Y axis	Y axis travelling	Mm	3000Mm
		Y axis moving speed	M/min	0-10 M/min
		Y axis servo motor power	KW	2.0 KW * 2
	X axis	X axis travelling	Mm	2000Mm
		X axis moving speed	M/min	0-10 M/min
		X axis servo motor power	KW	1.5kw
	Z axis	Vertical ram feed motion (Z axis) stroke length	Mm	180mm
		Z axis moving speed	M/min	0-5.0 M/min
		Z axis servo motor power	KW	2KW with brake
Drilling precision	Positioning Precision in "X" and "Y" axis		Mm	≤0.08mm/Entire Journey
	Re-positioning precision in "X" and "Y" axis		Mm	≤0.04mm/Entire Journey
Pneumatic system	Compressed air storage pressure		MPa	≥0.5MPa
Chip removal and cooling System	Chip conveyor type			Steel flat chain
	Number of chip conveyors		PCS	1 Pcs
	Chip removal speed		M/min	1 M/min
	Chip conveyor motor power		KW	0.75 KW
	Cooling pump motor power		KW	0.25 KW
	Cooling box volume		L	200 L
Automatic lubrication System	Lubrication pressure		MPa	2.0 MPa
	Lubrication point oil volume		ML	0.1 ML
	Lubrication Cycle		Minutes	6-10 min
Electrical System	CNC Controller System			YOKOGAWA
	Number of CNC Axis			3 Axis
Machine size	LxWxH		Mm	6000x3000x2900mm
Total motor power			KW	About 25KW
Machine Bed weight(appx)			T	More than 9.5 Tons
Shipping with Container				1 x40 ft Container

4. Machine working environment

1	Power	three-phase and four-wire system
2	Voltage	415V or 380V±10%
3	Frequency	50Hz
4	Working Temperature	0℃-40℃
5	Relative humidity	<90% non-condensing
6	Compressed air	Voltage:0.4MPa