English
Русский
Español
العربية
CNC Plate Punching Marking and Drilling Machine
The YBJZ100 New Type High-Speed CNC Hydraulic Connecting Plate Punching Marking Drilling Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching and typing of connecting plates.
Machine Configuration Introduction
YBJZ 100 New Type High-Speed CNC Hydraulic Connecting Plate Punching Marking Drilling Machine is composed of Punching Host Unit(contains Drilling, Marking process), Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.
2. Basic configuration of the machine
2.1 Mechanical part
| No. | Item | YBJZ 100 |
| 1 | Machine Layout Area | 5000*3500*2000Mm |
| 2 | No. of Hosts | 1 Set |
| 3 | No. of Workbench Bases | 1 Set |
| 4 | No. of Y-Slide | 1 Set |
| 5 | No. of X-direction Slide | 1 Set |
| 6 | No. of Clamps | 2 Sets |
| 7 | No. of drilling spindle heads | 1 Set |
| 8 | Pneumatic control system | 1 Set |
| 9 | Hydraulic control system | 1 Set |
| 10 | The purchaser is responsible for the part | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
2.2 Electronic control part
| 1 | Numerical Control System | PLC Control System |
| 2 | Driving System | Panasonic Servo Motor |
3. Technical parameters of the machine
| No. | Item | Commodity | |
| YBJZ 100 | |||
| 1 | Processing Plate Range(Mm) | 1500*800mm | |
| 2 | Processing plate thickness(Mm) | 5-25mm | |
| 3 | Max Punching Diameter | Round hole φ25.5mm (16Mn-Q345, 20mm thickness; Q235, 25mm thickness). | |
| 4 | Max Punching force(KN) | 1000KN | |
| 5 | Number of die per side | 4 Pcs (Contain 1 Pc marking +2 Pcs Punching +1 Pc Drilling) | |
| 6 | Typing ability(KN) | 800KN | |
| 7 | Qty of typing groups | 10 Groups | |
| 8 | Character size | (L*W*H)14*10*19mm | |
| 9 | CNC Axis | 2 Axis | |
| 10 | X, Y axis servo motor power | 2*2KW | |
| 11 | Hydraulic pump motor power | 26KW | |
| 12 | Required compressed air pressure X displacement | 0.5MPaX0.1m2/min | |
| 13 | X, Y axis feeding speed | 20m/min | |
| 14 | Punching speed | 40-45 Times/Min | |
| 15 | Drilling Plate thickness(Max) | 40 Mm | |
| 16 | Drilling hole diameter(Max) | φ50 Mm | |
| 17 | Stroke of Spindle(Mm) | 180mm | |
| 18 | Power of Drilling Spindle(Kw) | 5.5Kw | |
| 19 | Machine Volume | Length (M) | ≈5.0 M |
| Width (M) | ≈3.5 M | ||
| Height (M) | ≈2.0 M | ||
| 20 | Total Weight (KGS) | ≈6000 | |
| 21 | Lubrication method | Automatic lubrication | |
4. Working Environment
| 1 | Power Supply | 3 Phase-4 Wire system |
| 2 | Voltage | 3 Phase 380V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating temperature | 0℃-40℃ |
| 5 | Relative Humidity | <90% No condensation |
| 6 | Air Compressed | Pressure: 0.8MPa Flow rate: 1.0m³/h |
