CNC Plate Punching Machine

The YBJZ100 New Type High-Speed CNC Hydraulic Connecting Plate Punching Marking Drilling Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching and typing of connecting plates.

2. Basic configuration of the machine

2.1 Mechanical part

No.	Item	YBJZ 100
1	Machine Layout Area	5000*3500*2000Mm
2	No. of Hosts	1 Set
3	No. of Workbench Bases	1 Set
4	No. of Y-Slide	1 Set
5	No. of X-direction Slide	1 Set
6	No. of Clamps	2 Sets
7	No. of drilling spindle heads	1 Set
8	Pneumatic control system	1 Set
9	Hydraulic control system	1 Set
10	The purchaser is responsible for the part	Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier

2.2 Electronic control part

1	Numerical Control System	PLC Control System
2	Driving System	Panasonic Servo Motor

3. Technical parameters of the machine

No.	Item		Commodity
			YBJZ 100
1	Processing Plate Range(Mm)		1500*800mm
2	Processing plate thickness(Mm)		5-25mm
3	Max Punching Diameter		Round hole φ25.5mm (16Mn-Q345, 20mm thickness; Q235, 25mm thickness).
4	Max Punching force(KN)		1000KN
5	Number of die per side		4 Pcs (Contain 1 Pc marking +2 Pcs Punching +1 Pc Drilling)
6	Typing ability(KN)		800KN
7	Qty of typing groups		10 Groups
8	Character size		(L*W*H)14*10*19mm
9	CNC Axis		2 Axis
10	X, Y axis servo motor power		2*2KW
11	Hydraulic pump motor power		26KW
12	Required compressed air pressure X displacement		0.5MPaX0.1m2/min
13	X, Y axis feeding speed		20m/min
14	Punching speed		40-45 Times/Min
15	Drilling Plate thickness(Max)		40 Mm
16	Drilling hole diameter(Max)		φ50 Mm
17	Stroke of Spindle(Mm)		180mm
18	Power of Drilling Spindle(Kw)		5.5Kw
19	Machine Volume	Length (M)	≈5.0 M
		Width (M)	≈3.5 M
		Height (M)	≈2.0 M
20	Total Weight (KGS)		≈6000
21	Lubrication method		Automatic lubrication

4. Working Environment

1	Power Supply	3 Phase-4 Wire system
2	Voltage	3 Phase 380V±10%
3	Frequency	50Hz
4	Operating temperature	0℃-40℃
5	Relative Humidity	<90% No condensation
6	Air Compressed	Pressure: 0.8MPa Flow rate: 1.0m³/h