CNC Marking And Punching Machine For Steel Plate Model YBJ120

Driving mode: Hydraulic drive System.

Application: Punching hole.

The machine structures is welded with C-shaped steel plate, and the stress is removed by tempering heat treatment. The steel plate welded structure has good rigidity and strong anti-eccentric loading ability.

1. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.

2.1 Mechanical Part

No.	Item	YBJ120
1	Machine Layout Area	5*3.5 M
2	No. of Hosts	1 Set
3	No. of Workbench Bases	1 Set
4	No. of Y-Slide	1 Set
5	No. of X-direction Slide	1 Set
6	No. of Clamps	2 Sets
8	Pneumatic control system	1 Set
9	Hydraulic control system	1 Set
10	Buyer Preparation Working	Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2.2 Electric control Part

1	CNC Controller system	PLC control system
2	Drive System	Panasonic Servo Motor

3. The main technical parameters of the machine

No.	Item	YBJ120
1	Processing plate size	1500*800mm
2	Processing plate thickness	5-27mm
3	Punching force	1200KN
4	Maximum punching diameter	Φ33mm
5	Total number of modules	3 Pcs
6	Number of punching die	2 Pcs
7	Number of print header groups	1 Group
8	Prefix	10 Pcs
9	Header size	(L*W*H)14*10*19mm
10	Number of CNC axes	2
11	X, Y axis servo motor power	2*2KW
12	X, Y axis feeding speed	20m/min
13	Punching speed	50-55 Times/Min
14	Total weight of equipment	6T

4. Machine working environment

1	Power supply	3 Phase 4-Wire System
2	Voltage	3 Phase 415V±10%
3	Frequency	50Hz
4	Operating Temperature	0℃-40℃
5	Relative Humidity	<90% no condensation
6	Compressed Air	Pressure: 0.8MPa Flow rate: 0.1m³/min