English
Русский
Español
العربية
CNC Drill Press
cnc plate hydraulic plate punching machine Application: Control system.
Components: It is composed of host computer, power supply, servo amplifier, transformer, PLC module, etc.
You only need to input the size of the workpiece to automatically generate the processing program, and also accept the workpiece processing program generated by the lofting software. It can be stored, recalled and displayed at any time by part number.
Driving mode: Panasonic servo motor drive system.
Transmission mode: Precision screw transmission.
Protection measures: The sheet metal shield prevents the servo motor from being polluted by dust.
1. Machine Model and Configuration
2.1 Mechanical Part
| No. | Item | YBJ100 | YBJZ100 | YBJ120D | YBJ120 |
| 1 | Machine Layout Area | 5*3.5 M | 5*4.5 M | ||
| 2 | No. of Hosts | 1 set | |||
| 3 | No. of Workbench Bases | 1 set | |||
| 4 | No. of Y-Slide | 1 set | |||
| 5 | No. of X-direction Slide | 1 set | |||
| 6 | No. of Clamps | 2 sets | |||
| 7 | No. of drilling spindle heads | NO | 1 set | NO | |
| 8 | Pneumatic control system | 1 set | |||
| 9 | Hydraulic control system | 1 set | |||
| 10 | Buyer Preparation Working | Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier | |||
2.2 Electric control Part
| 1 | CNC Controller system | PLC control system |
| 2 | Drive System | Panasonic Servo Motor |
3. The main technical parameters of the machine
| No. | Item | YBJ100 | YBJZ100 | YBJ120D | YBJ120 |
| 1 | Processing plate size | 1500*800mm | 1500*1500mm | ||
| 2 | Processing plate thickness | 5-25mm | |||
| 3 | Punching force | 1000KN | 1200KN | ||
| 4 | Maximum punching (drilling) hole diameter | Φ26mm | Φ26mm Drilling OD Φ50 | Φ26mm | Φ30mm-25mm Φ40 mm-20mm |
| 5 | Total number of modules | 3 Pcs | 4 Pcs | 3 Pcs | |
| 6 | Number of punching die | 2 Pcs | 3 Pcs | ||
| 7 | Number of print header groups | 1 Group | NO | ||
| 8 | Prefix | 10 Pcs | NO | ||
| 9 | Header size | (L*W*H)14*10*19mm | NO | ||
| 10 | Number of CNC axes | 2 | |||
| 11 | X, Y axis servo motor power | 2*2KW | |||
| 12 | X, Y axis feeding speed | 20m/min | |||
| 13 | Punching speed | 50-55 Times/Min | |||
| 14 | Total weight of equipment | 6T | 6.5T | 7.8T | 9.5T |
4. Machine working environment
| 1 | Power supply | 3 Phase 4-Wire System |
| 2 | Voltage | 3 Phase 380V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating Temperature | 0℃-40℃ |
| 5 | Relative Humidity | <90% no condensation |
| 6 | Compressed Air | Pressure: 0.8MPa Flow rate: 0.1m³/min |
4. Machine parts introduction
The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.
