CNC Angle Marking Punching and Cutting Machine

1. Brief Introduction

CNC Angle Steel High Speed Punching, Marking &Sharing Production Line belongs to high speed Angle steel production line. It is a high efficiency Angle steel production line newly developed by our company in line with the aim of "keeping in line with the international standards and synchronizing with the world" and combining with the existing materials, equipment, staff skills and other factors. It has the advantages of high processing efficiency, high processing accuracy, low failure rate, wide range of products, less occupation, many functions, easy operation, etc. It is the first choice of the Angle steel processing enterprises.

2. Basic configuration of the machine

2.1 Mechanical part

Serial No.	Item	YJX1010	YJX1010L	YJX1612	YJX1612L	YJX2020S/D
1	Total length	24200mm	24500mm	28500mm	29000mm
2	Quantity of feeding table	3 group		4 group
3	Quantity of overturning tables	3 group		4 group
4	Quantity of feeding driver	1 group
5	Length of feeding passage	15800mm		16000mm
6	Length of the host	2100mm	2400mm	2300mm	2200mm
7	Length of finished passage	6m		10m
8	Pneumatic control system	1 set
9	Hydraulic control system	1set
10	Feeding direction	According to user requirements
11	Integrated hydraulic station	YES			No
12	The purchaser is responsible for the part	Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier

2.2 Electronic control part

1	Numerical controlsystem	PLC control system
2	Drive system	Panasonic servo motor

3. Technical parameters of the machine

No.	Item	Commodity
		YJX1010	YJX1010L	YJX1612	YJX1612L	YJX2020S/D
1	Angle Beam Range	40*40*4-160*160*12		40*40*4-160*160*12		56*56*4-200*200*20
2	Max Punching Diameter	Φ26mm	Φ26mm Oblong hole 18*50 mm	Φ26mm	Φ26 mm Oblong hole 22*50 mm	Φ26mm
3	Max Punching force(KN)	700KN				1000KN
4	Punching Side	2 Sides
5	Number of die per side	2 Pcs	3 Pcs	2 Pcs	3 Pcs
6	Typing ability	700KN/1000KN
7	Qty of typing groups	4 Groups
8	Digit number of each group	12 Pcs
9	Character size	(L*W*H)14*10*19mm
10	Shearing force	1200KN		1500KN		1500/4300KN
11	Shearing method	Single Blade Cutting				Double Blade Cutting/Single Blade Cutting
12	CNC Axis	3 Axis
13	Length of Workpiece	12 M
14	Discharging method of finished products	Pneumatic pushing material, turning out to one side
15	Angle Beam feeding speed	Max 90m/min
16	Programming Mode	Input by keyboard, RS232, CAD floppy disk input &USB interface
17	Lubrication method	Equipped with automatic lubrication
18	Fabrication Precision	Hole diameter tolerance: 0-0.8mm
		Dmax-Dmin: ≤1.2mm Aperture roundness tolerance range: Dmax-Dmin: ≤1.2mm
		Hole perpendicularity error: ≤0.36mm
		Distance tolerance of two adjacent holes in the same group: ±0.5mm
		The hole distance tolerance of two non-adjacent holes in the same group: ±0.7mm
		End distance tolerance : ±1.2mm
		Shearing length tolerance: ±1mm
		Verticality of cut surface: ≤1.2mm

4.Working Environment

1	Power Supply	Three-phase four-wire system
2	Voltage	380V±10%
3	Frequency	50Hz
4	Operating temperature	0℃-40℃
5	Relative Humidity	<90%No condensation
6	Air Compressed	Pressure: 0.8MPa Flow rate: 1.0m³/h

5.Machine Configuration Introduction

The machine is mainly composed of feeding table, turning feeding table, feeding channel, feeding trolley, punching unit,