CNC Marking Punching and Drilling Machine for Steel Plate model YBJZ100

The YBJ 100 New Type High-Speed CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching and typing of connecting plates.

2. Basic configuration of the machine

2.1 Mechanical part

No.	Item	YBJ 100
1	Machine Layout Area	5000*3500 Mm
2	No. of Hosts	1 Set
3	No. of Workbench Bases	1 Set
4	No. of Y-Slide	1 Set
5	No. of X-direction Slide	1 Set
6	No. of Clamps	2 Sets
7	No. of drilling spindle heads
8	Pneumatic control system	1 Set
9	Hydraulic control system	1 Set
10	The purchaser is responsible for the part	Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier

2.2 Electronic control part

1	Numerical Control System	PLC Control System
2	Driving System	Panasonic Servo Motor

3. Technical parameters of the machine

No.	Item		Commodity
			YBJ 100
1	Processing Plate Range(Mm)		1500*800mm
2	Processing plate thickness(Mm)		5-25mm
3	Max Punching Diameter		Round hole φ25.5mm (16Mn, 20mm thick; Q235, 25mm thickness).
4	Max Punching force(KN)		1000KN
5	Number of die per side		3 Pcs (Including to 1 Pc marking + 2 Pcs Punching)
6	Typing ability(KN)		800KN
7	Qty of typing groups		10 Groups
8	Character size		(L*W*H)14*10*19mm
9	CNC Axis		2 Axis
10	X, Y axis servo motor power		2*2KW
11	Hydraulic pump motor power		22KW
12	Required compressed air pressure X displacement		0.5MPaX0.1m2/min
13	X, Y axis feeding speed		20m/min
14	Punching speed		40-45 Times/Min
15	Machine Volume	Length (M)	≈5.0 M
		Width (M)	≈3.5 M
		Height (M)	≈2.0 M
16	Total Weight (KGS)		≈6000
17	Lubrication method		Automatic lubrication

4.Working Environment

1	Power Supply	3 Phase-4 Wire system
2	Voltage	3 Phase 380V±10%
3	Frequency	50Hz
4	Operating temperature	0℃-40℃
5	Relative Humidity	<90% No condensation
6	Air Compressed	Pressure: 0.8MPa Flow rate: 1.0m³/h

5. Machine Configuration Introduction

YBJ 100 New Type High-Speed CNC Hydraulic Connecting Plate Punching Machine is composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.