English
Русский
Español
العربية
CNC Marking Punching and Shearing Machine for Angles Model YJX0605
YJX0605 New Type High-Speed CNC Angle Steel Punching Typing & Shearing Production Line is a high-speed angle steel production line. It is our company's purpose of "connecting with international standards and keeping pace with the world", combining my country's existing materials, equipment, staff skills and other factors. A newly developed high-efficiency angle steel production line. It has the advantages of high processing efficiency, high processing accuracy, low failure rate, wide range of applicable products, small area, multiple functions, and easy operation. It is the first choice for angle steel processing enterprises.
YJX-0605 machine is suitable for stamping/ typing, punching hole and shearing of angle beam/steel profiles in the fields of electric power, communication, metal fittings, three-dimensional garage, elevator manufacturing, air-conditioning manufacturing, etc. It can realize the one-time hole forming of oblong holes and special-shaped holes by changing
2. Basic configuration of the machine
2.1 Mechanical part
| No. | Item | YJX0605 |
| 1 | Total length | 24200mm |
| 2 | Quantity of feeding table | 3 group |
| 3 | Quantity of overturning tables | 3 group |
| 4 | Quantity of feeding driver | 1 group |
| 5 | Length of feeding passage | 15800mm |
| 6 | Length of the host | 2100mm |
| 7 | Length of finished passage | 6m |
| 8 | Pneumatic control system | 1 Group |
| 9 | Hydraulic control system | 1 Group |
| 10 | Feeding direction | According to user requirements |
| 11 | Integrated hydraulic station | Yes |
| 12 | The purchaser is responsible for the part | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
2.2 Electronic control part
| 1 | Numerical Control System | PLC Control System |
| 2 | Driving System | Panasonic Servo Motor |
3. Technical parameters of the machine
| No. | Item | Commodity |
| YJX0605 | ||
| 1 | Angle Beam Range(Mm) | 25*25*3-60*60*5 |
| 2 | Max Punching Diameter | Φ26mm(Q235, Q345), punching of special-shaped holes and oblong holes can be achieved by changing the mold |
| 3 | Max Punching force(KN) | 700KN |
| 4 | Punching Side | 2 Sides |
| 5 | Number of die per side | 2 Pcs |
| 6 | Typing ability(KN) | 700KN |
| 7 | Qty of typing groups | 4 Groups |
| 8 | Digit number of each group | 12 Pcs |
| 9 | Character size | (L*W*H) 14*10*19mm |
| 10 | Shearing force(KN) | 1250KN |
| 11 | Shearing method | Single Blade Shearing |
| 12 | CNC Axis | 3 Axis |
| 13 | Length of Blank Workpiece(M) | 12 M |
| 14 | Max Length of Workpiece(M) | 12 M |
| 15 | Length of finished workpiece(M) | 10 M |
| 14 | Discharging method of finished products | The finished material channel is pushed manually and turned out to one side. The power source for turning out is pneumatic. |
| 16 | Angle Beam feeding speed | Max 90m/min |
| Punching speed(times/min) | Average 50-60 times/min | |
| 17 | Programming Mode | Input by keyboard, RS232, CAD floppy disk input &USB interface |
| 18 | Lubrication method | Equipped with automatic lubrication |
| 19 | Fabrication Precision | Hole diameter tolerance: 0-0.8mm |
| Dmax-Dmin: ≤1.2mm Aperture roundness tolerance range: Dmax-Dmin: ≤1.2mm | ||
| Hole perpendicularity error: ≤0.36mm | ||
| Distance tolerance of two adjacent holes in the same group: ±0.5mm | ||
| The hole distance tolerance of two non-adjacent holes in the same group: ±0.7mm | ||
| End distance tolerance : ±1.2mm | ||
| Shearing length tolerance: ±1mm | ||
| Verticality of cut surface: ≤1.2mm |
4. Working Environment
| 1 | Power Supply | 3 Phase 4 Wire System |
| 2 | Voltage | 415V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating temperature | 0℃-40℃ |
| 5 | Relative Humidity | <90% No condensation |
| 6 | Air Compressed | Pressure: 0.8MPa Flow rate: 1.0m³/h |
5. Machine Configuration Introduction
YJX-0605 New Type High-Speed CNC Angle Steel Punching Typing & Shearing Machine is mainly composed of feeding table, turning feeding table, feeding channel, feeding trolley, punching unit, typing unit, shearing unit, finished material channel, electrical system, hydraulic system, etc.
