CNC Lathe Machine model CJK6136

Cnc lathe machine model CK6140

1. Machine Model and Configuration

2.1 Mechanical Part

No.	Item	YBJ100	YBJZ100	YBJ120D	YBJ120
1	Machine Layout Area	5*3.5 M			5*4.5 M
2	No. of Hosts	1 set
3	No. of Workbench Bases	1 set
4	No. of Y-Slide	1 set
5	No. of X-direction Slide	1 set
6	No. of Clamps	2 sets
7	No. of drilling spindle heads	NO	1 set	NO
8	Pneumatic control system	1 set
9	Hydraulic control system	1 set
10	Buyer Preparation Working	Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2.2 Electronic Control Part

1	CNC Controller system	PLC control system
2	Drive System	Panasonic Servo Motor

3. The main technical parameters of the machine

No.	Item	YBJ100	YBJZ100	YBJ120D	YBJ120
1	Processing plate size	1500*800mm			1500*1500mm
2	Processing plate thickness	5-25mm
3	Punching force	1000KN		1200KN
4	Maximum punching (drilling) hole diameter	Φ26mm	Φ26mm Drilling OD Φ50	Φ26mm	Φ30mm-25mm Φ40mm-20mm
5	Total number of modules	3 Pcs	4 Pcs	3 Pcs
6	Number of punching die	2 Pcs			3 Pcs
7	Number of print header groups	1 Group			NO
8	Prefix	10 Pcs			NO
9	Header size	(L*W*H)14*10*19mm			NO
10	Number of CNC axes	2
11	X, Y axis servo motor power	2*2KW
12	X, Y axis feeding speed	20m/min
13	Punching speed	50-55 Times/Min
14	Total weight of equipment	6T	6.5T	7.8T	9.5T

4. Machine working environment

1	Power supply	3 Phase 4-Wire System
2	Voltage	3 Phase 380V±10%
3	Frequency	50Hz
4	Operating Temperature	0℃-40℃
5	Relative Humidity	<90% no condensation
6	Compressed Air	Pressure: 0.8MPa Flow rate: 0.1m³/min

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.