CNC Angle Marking Punching and Cutting Machine

YJX-2020 New Type High-Speed CNC Angle Steel Punching Typing & Shearing Production Line is a high-speed angle steel production line. It is our company's purpose of "connecting with international standards and keeping pace with the world", combining my country's existing materials, equipment, staff skills and other factors. A newly developed high-efficiency angle steel production line. It has the advantages of high processing efficiency, high processing accuracy, low failure rate, wide range of applicable products, small area, multiple functions, and easy operation. It is the first choice for angle steel processing enterprises.

2. Basic configuration of the machine

2.1 Mechanical part

No.	Item	YJX2020S
1	Total length	29000mm
2	Quantity of feeding table	4 group
3	Quantity of overturning tables	4 group
4	Quantity of feeding driver	1 group
5	Length of feeding passage	16000mm
6	Length of the host	2200mm
7	Length of finished passage	10m
8	Pneumatic control system	1 Group
9	Hydraulic control system	1 Group
10	Feeding direction	According to user requirements
11	Integrated hydraulic station	No
12	The purchaser is responsible for the part	Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier

2.2 Electronic control part

1	Numerical Control System	PLC Control System
2	Driving System	Panasonic Servo Motor

3. Technical parameters of the machine

No.	Item	Commodity
		YJX2020
1	Angle size Range(mm)	56*56*4-200*200*20
2	Max Punching Diameter	Φ25.5mm(Q235, Q345), punching of special-shaped holes and oblong holes can be achieved by changing the mold
3	Max Punching force(KN)	1000KN
4	Punching Side	2 Sides
5	Number of die per side	3 Pcs
6	Typing ability(KN)	1030KN
7	Qty of typing groups	4 Groups
8	Digit number of each group	12 Pcs
9	Character size	(L*W*H)14*10*19mm
10	Shearing force(KN)	1500KN
11	Shearing method	Double Blade Shearing
12	CNC Axis	3 Axis
13	Length of Blank Workpiece(M)	12 M
14	Max Length of Workpiece(M)	12 M
15	Length of finished workpiece(M)	10 M
14	Discharging method of finished products	The finished material channel is pushed manually and turned out to one side. The power source for turning out is pneumatic.
16	Angle Beam feeding speed	Max 90m/min
17	Programming Mode	Input by keyboard, RS232, CAD floppy disk input &USB interface
18	Lubrication method	Equipped with automatic lubrication
19	Fabrication Precision	Hole diameter tolerance: 0-0.8mm
		Dmax-Dmin: ≤1.2mm Aperture roundness tolerance range: Dmax-Dmin: ≤1.2mm
		Hole perpendicularity error: ≤0.36mm
		Distance tolerance of two adjacent holes in the same group: ±0.5mm
		The hole distance tolerance of two non-adjacent holes in the same group: ±0.7mm
		End distance tolerance : ±1.2mm
		Shearing length tolerance: ±1mm
		Verticality of cut surface: ≤1.2mm

4. Working Environment

1	Power Supply	3 Phase-4 Wire system
2	Voltage	415V±10%
3	Frequency	50Hz
4	Operating temperature	0℃-40℃
5	Relative Humidity	<90% No condensation
6	Air Compressed	Pressure: 0.8MPa Flow rate: 1.0m³/h

5. Machine Configuration Introduction

YJX-1616 New Type High-Speed CNC Angle Steel Punching Typing & Shearing Production Line is mainly composed of feeding table, turning feeding table, feeding channel, feeding trolley, punching unit, typing unit, shearing unit, finished material channel, electrical system, hydraulic system, etc.